Stonepak by Premier Tech Systems Stonepak, Since 1901 by Premier Tech Systems
Help me choose a bag packaging system
1.What product or products do you wish to bag?
2.  Which best describes your product flow characteristics? ( Select all that apply )
3.  What is the bulk density of the product/s?
Loose:
Tapped:
4.  What is the mesh size of the product/s?
5.  What is the available head room under which the bagger will be located?
6.  What type of bag are you using? Valve
Pinch Bottom Open Mouth
Sewn Open Mouth
Other:
7.  List each Valve bag dimension you intend to fill?
Length
x
Width
x
Top
x
Valve Size
x x x
x x x
x x x
x x x
8.  List each Open Mouth bag dimension you intend to fill?
Length
x
Width
x
Gusset
x x
x x
x x
x x
9.  What is the bag construction? (select all that apply)  2-Ply      3-Ply      Poly
 Full Barrier Poly Liner      Perforated    
 Tuck-In Sleeve Valve  Sealable Valve    
 Reduced Valve
10.  Does the bag require closing or sealing? Yes     No
10.a  If Yes, select which type?  Ultrasonic      Tuck-In Sleeve      Poly
 Pinch Bag Close      Pinch Bag Seal/Close
 Sew      Sew & Tape      Heat Seal Poly
11.  What is the target bag weight/s? (select all that apply)  10 lb (4.5 kg)      25 lb (11 kg)
 50 lb (22 kg)      100 lb (45 kg)
 Other, specify  
12.  What is the target weight accuracy?   +/- 6 - 8 oz (170 - 227 grams)
  +/- 4 - 6 oz (113 - 170 grams)
  +/- 3 - 4 oz (85 - 113 grams)
  +/- 2 - 3 oz (56 - 85 grams)
13.  How many bags per minute do you require?
14.  Is the product abrasive? Yes     No
15.  Is the product corrosive? Yes     No
16.  Is stainless steel product contact required?  Yes 304      Yes 316      No, Mild Steel Only    
17.  What electrical enclosure is required? NEMA 12 (~ IP55) dust tight    
NEMA 4 (~IP66) water tight    
NEMA 4X (~ IP66) water tight and corrosion resistant
Other
18.  Is a level control bin required? Yes   Bin Level Sensors   Not Required
19.  Do you require automatic bag placement? Yes     No
20.  Do you require automatic bag stacking? Yes     No
21.  Is each bag required to be stacked butts out? Yes     No
22.  Select the bag patterns. 3   4   5   6   7   8   9   10  
23.  Select the pallet type and dimension. Two-Way Four-Way Standard GMA
Length x Width x Height
x x
x x
24.  What is the number of bag layers on the pallet?
25.  Do you require a bag flattener? Yes     No
26.  Do you require a down-stream check weigher? Yes     No
27.  Do you require a metal detector? Yes     No
28  Do you require a bag printer? (if, Yes, see 28a/b) Yes     No
28.a  What information, size, etc. must the bag printer print?
28.b  Where is printing required? Butt  Gusset  Top  Face/Back 
29.  What line voltage is available? 460 V 3 Ph  60 Hz  50 Hz 
230 V 3 Ph  60 Hz  50 Hz 
Other 
30.  What control voltage is available? 220 V 1 Ph  60 Hz  50 Hz 
110 V 1 Ph  60 Hz  50 Hz 
24 VDC 
Other 
31.  Select the bagging area classification if product is explosive. Non-Classified  II-G-2 (Dust Abnormally Present 
II-G-1 (Dust Always Present)  I-D-2 (Gas Abnormally Present 
32.  Select which machine paint is required? Steel It (Stainless Steel Color) Standard
Other Enamel, List Color
Epoxy, List Color
Powder Coat White
Send quote to:
Name:* A value is required.
Title:
Company:* A value is required.
Address1:
Address2:
City:* A value is required.
State/Province: Please select an item.
Zip Code: * A value is required.
Country:* Please select an item.
Phone:
Fax:
E-mail:* A value is required.Invalid format.
Preferred Method of Contact: E-Mail
Phone
Fax
     
Premier Tech Systems